30/06/2017
Dialysis is the process by which molecules filter out of one solution, by diffusing through a membrane, into a more dilute solution. Outside of haemodialysis, which removes waste from blood, scientists use dialysis to purify drugs, remove residue from chemical solutions, and isolate molecules for medical diagnosis.
Read More
|
|
12/06/2017
A team of scientists from Yanshan University and Carnegie Institution for Science has developed a form of ultrastrong, lightweight carbon that is also elastic and electrically conductive. This unique combination of properties could serve a variety of applications from aerospace engineering to military armour.
Read More
|
|
02/06/2017
Researchers at ETH Zurich, led by head of the Engineering Design and Computing Lab Kristina Shea, have developed a construction principle to control the deformation of load bearing 4D printed objects. The moveable and shape-variable objects can be printed as flat components that can be folded out later. The hope is they can also change their shape via external influences or induced forces.
Read More
|
|
26/05/2017
According to research conducted by Chalmers University of Technology and the Technical University of Denmark, a new type of nanocatalyst can result in the long-awaited commercial breakthrough for fuel cell cars.
Read More
|
|
25/05/2017
Studies by researchers from Lund University in Sweden and Fudan University in China have shown increased efficiency in solar cells thanks to perovskite’s ability to self-organise by standing on edge.
Read More
|
|
12/05/2017
The inaugural Engineering Materials Live Show kicked off on Thursday 11 May at the National Motorcycle Museum in Solihull. Coupled with the long running FAST exhibition, delegates arrived early enticed by the thought of a bacon sandwich and cup of coffee, before quickly turning their attention to the packed exhibitors’ halls and content-rich technical seminar sessions.
Read More
|
|
09/05/2017
According to research by the University of Manchester, graphene could help reduce the energy cost of producing heavy water and decontamination in nuclear power plants by over 100 times compared with current technologies. This could lead to the reduction of CO2 emissions associated with heavy water production by up to a million tonnes per year.
Read More
|
|
05/05/2017
Researchers from the University of Exeter have devised a ground-breaking method to use graphene to generate complex and controllable sound signals, combining speaker, amplifier and equaliser into a chip the size of a thumbnail.
Read More
|
|
04/05/2017
A research team from Washington State University (WSU) has developed a promising way to recycle the carbon fibre plastics that are used in everything from modern airplanes and sporting goods to the wind energy industry.
Read More
|
|
02/05/2017
Exhibitor stands have now completely sold out for the Engineering Materials Live exhibition as the new event is set to open its doors to visitors on 11th May at the National Motorcycle Museum, Birmingham.
Read More
|
|
21/04/2017
Raul Polit Casillas, systems engineer at NASA's Jet Propulsion Laboratory and his colleagues have designed an advanced woven metal fabric for use in spacesuits and structures.
Read More
|
|
10/04/2017
With one month to go until doors open for the co-located FAST Exhibition and Engineering Materials Live exhibitions, the event has so far seen record pre-registration levels for attendees and several new additions to its exhibitor portfolio of leading suppliers from the fastening, bonding and engineering materials sectors.
Read More
|
|
21/03/2017
Researchers at the US National Institute of Standards and Technology (NIST) have developed a way to embed a nanoscale damage-sensing probe into a lightweight composite made of epoxy and silk. The probe, known as a mechanophore, could speed product testing and potentially reduce the amount of time and materials needed for the development of many kinds of new composites.
Read More
|
|
15/03/2017
The makers of Braeön (pronounced “brawn”) say it’s plastic composite material is a lighter, more versatile alternative to rope of metal while exhibiting the most beneficial features of both. Boasting a tensile strength of over 900kg, a 100ft length of the composite ribbon weighs less than 0.5kg.
Read More
|
|
13/03/2017
Scientists at the US Department of Energy’s (DOE) Argonne National Laboratory have invented a foam, called Oleo Sponge, that not only absorbs oil from water, but is also reusable and can pull dispersed oil from the entire water column - not just the surface.
Read More
|
|
24/02/2017
Jo Johnson, Minister of State for Universities, Science, Research and Innovation, has confirmed £128million of funding for research equipment and facilities to develop advanced materials. £105m of the funding will be devoted to the construction of the building to host the Henry Royce Institute at The University of Manchester.
Read More
|
|
17/02/2017
The short shelf life of composite materials can result in large quantities of waste and high cost and long lead time make sourcing materials for research difficult. Dr James Meredith, from the Department of Mechanical Engineering at the University of Sheffield, has come up with a novel solution to these problems by creating the Composites Exchange, a website which gives users the ability to share and acquire unwanted composite materials.
Read More
|
|
16/02/2017
MacRebur is on a mission to fix UK roads by launching a crowdfunding campaign on Seedrs to take their patented idea worldwide. The three founders are looking to raise £590,000 equity to grow and develop their business, which is already disrupting the UK asphalt industry.
Read More
|
|
08/02/2017
McLaren Automotive is to open a £50million purpose-built Composites Technology Centre at the University of Sheffield's Advanced Manufacturing Research Centre (AMRC) in a move expected to create more than 200 jobs. The facility will be responsible for the development and manufacturing of advanced carbon fibre chassis for McLaren supercars.
Read More
|
|
01/02/2017
Electrical engineers at Duke University claim to have created the world's first electromagnetic metamaterial made without any metal. The device's ability to absorb electromagnetic energy without heating up has direct applications in imaging, sensing and lighting.
Read More
|
|
31/01/2017
A team of engineers and scientists at Caltech and ETH Zurich have developed an artificial skin capable of detecting temperature changes.
Read More
|
|
27/01/2017
The Composite Centre of the University of Sheffield Advanced Manufacturing Research Centre (AMRC) with Boeing has won £360,000 in funding from Innovate UK to investigate the way composite material is developed for use in automotive components.
Read More
|
|
26/01/2017
University of Michigan researchers have developed a new way to design a metamaterial that can be easily manipulated to increase the stiffness of its surface by orders of magnitude - the difference between rubber and steel - without damaging or altering the material itself.
Read More
|
|
25/01/2017
The Centre for Process Innovation (CPI) is part of a consortium that aims to develop a low cost self-cleaning coating technology based on functionalised graphene, which once applied to industrial membranes increases the resistance to fouling or enhances ion removal.
Read More
|
|
20/01/2017
New items have been added to the Museum of Science and Industry’s Wonder Materials exhibition. The new section of the exhibition, ‘From now to the future’, looks at pioneering applications of graphene in the home and also looks at how a new generation of wonder materials could help tackle some of the huge environmental challenges facing humanity.
Read More
|