Next-generation Stop-Start system substantially broadens range of benefits

A new generation of Belt-Integrated Starter Generators (B-ISG)) have been developed by powertrain engineering consultancy Integral Powertrain. The system solves the cost-benefit issues that have slowed the uptake of existing B-ISG technologies by providing starting refinement equivalent to today's very best systems. These run alongside additional benefits such as powering the air-conditioning system while the engine is stopped and reducing losses whilst the engine is running.

"Existing B-ISG systems provide refined stop-start operation, but they have significant disadvantages," explains Integral Powertrain technical director Luke Barker. "This is mainly due to the requirement to generate very high torque and transmit it through the accessory belt, which impacts cost, packaging, weight and efficiency. A further issue is that engine-off comfort is compromised unless an expensive electrical air conditioning pump is fitted."

At the heart of Integral Powertrains' innovative is a Variable Ratio Pulley. This packages a two-ratio epicyclic gearbox into the belt drive pulley hub. To start the engine, the high ratio (3.1:1 in the development system) is engaged to substantially reduce the torque requirement. This allows a medium sized diesel engine to be cranked without the need for a high belt tension and the associated friction and wear.

Tests have shown that engine start occurs in less than 0.3 seconds. When the engine is running, the ancillary drive ratio returns smoothly to 1:1 or can be maintained at the high ratio during low engine speed operation if accessory loading is high. The ability to maintain an efficient drive speed enables lighter, more compact ancillaries resulting in further efficiency improvements.

The Variable Ratio Crank Pulley also provides substantial cost savings for vehicles that have an electric drive capability. When the engine is off, the freewheel facility allows the ancillary drive belt to be powered by the motor, allowing belt-driven ancillaries such as hydraulic power steering, air conditioning and coolant pumps to continue to function in the normal way.

This eliminates the need to specify electrically-driven ancillaries and provides the additional comfort and safety of continuous operation of these systems during engine-off operation.

Traditional systems also need a substantial electrical machine and inverter, with a large battery or costly ultra-capacitor system to provide a high current for fast starting in cold conditions.

"Our variable ratio system reduces these costs too," says Barker. "It also allows the use of efficient, cost-effective permanent magnet machines where previously the combination of high stall torque and high maximum speed has made this type of machine impractical for stop-start. This is particularly significant for mild hybrid applications as it enables increased electrical power and efficiency."

With a diameter of 150mm and integrated low-cost, water cooled power electronics, the new machine can directly replace a standard alternator. As well as starting, the machine (rated at 5-10kW) will provide efficient regenerative braking and torque enhancement at a price that will make it affordable in volume sectors.

The new stop-start system has already successfully completed the first phase of physical testing. "This is an elegant concept that provides tremendous benefits," concludes Barker. "Test results have been extremely impressive, leading to interest from vehicle manufacturers that could see production from around 2012."

Author
J Cunningham

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

 

Supporting Information
Do you have any comments about this article?
What began to be an interesting read was deterred when mention was made about hydraulic power assisted steering system. I wonder how these accessiories taxing the crank pulley are still being considered! Electric airconditioning however is a welcome development. I'm hoping that some day the ISG would completely replace the mechanical gearbox in assisting the ICE during its torque challanged regions. This feature might be closer than 1 can imagine. I already crank the self motor to provide torque support to pull up from very low speeds in higher gears insted of down shifting to a lower gear :D

Comment GB, 08/04/2018
Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

© MA Business Ltd (a Mark Allen Group Company) 2020