Andy Green’s Bloodhound Project diary

An ambitious start to the New Year. I spent last summer running air operations over Libya, so missed out on our long-planned summer sailing holiday. As a result, our holiday crew decided to rent a boat and head out over the New Year instead – which was great fun (even in the rain) until the last day, when the storms arrived..... I've never experienced a 60 mph gust while at sea before – the force was truly humbling.

Now that safely back on land, I've had time to think about the gale-force winds. The power of the wind at 60+ mph was huge – and that is about one seventeenth the speed of BLOODHOUND SSC. It's even worse than that, though. Air loads are proportional to the square of the wind speed, so compared to the battering our humble hire-yacht took, BLOODHOUND at 1000 mph will be subject to about (17x17=) 289 times the aerodynamic force. I'm glad that we've spent 5 years on the aerodynamic research, to make sure that's it exactly right – it will need to be.

Of course, we're not the only ones planning to hurl a car through the air at supersonic speeds. It's an extraordinary time for the Land Speed Record right now, with more teams competing for the Record than at any time since the 1960's. The slower(!) teams are only building cars for 800 mph, aiming to break our current record of 763 mph. The other 'fast' teams are looking to match our target of 1000 mph.

The good news is that most teams have some sort of education programme as well. They've got some way to go to match the BLOODHOUND's current total of over 4800 schools and colleges taking part, but every little helps – and the sheer variety of cars taking part in this 'Engineering Adventure' makes the education story so much more interesting.

The 800 mph cars include 3 US teams: Steve Fossett's old car, which is up for sale (and I really hope it sells soon – it would be great to see it run), the North American Eagle, a cut-down ex-NASA jet fighter, and a new bid from 5-times World Record holder Craig Breedlove. Two of these cars are pretty much ready to run, so they could produce some exciting results during 2012.

In the 'fast' (1000 mph) category are the rocket cars, lead by long-time Australian campaigner Rosco McGlashan and his Aussie Invader 5R. Rosco is well into the build of his car, so again we're hoping to see him run within a couple of years. We don't know much about the prospects for the Australian 'Silver Bullet' or the American 'Sonic Wind LSRV' cars, other than they intend to try and go very fast.

Finally, there is a new player on the scene, in the form of the New Zealand 'Jet Black' team – another would-be '1000 milers' They have 2 things in common with BLOODHOUND. First, they are also planning to use the benefits of both a jet engine and rocket motors. Second, their driver is an ex-RAF fast jet pilot – so they're bound to do well!

One thing that all the 1000 mph rocket cars have in common is the challenge of developing the rocket technology. This, in my view, is going to be one of BLOODHOUND's big challenges for 2012. We are using a very 'safe' rocket, with non-explosive solid rubber as its fuel and non-explosive (but highly corrosive) High Test Peroxide as the oxidiser. Making the rocket go involves mixing these 2 at high temperature and pressure. We have to pump almost 1000 kg of the HTP oxidiser into the rocket at 76 Bar (1000 psi) in about 20 seconds. We expect the pump to take about 700 hp to turn it – hence the Cosworth F1 engine being used as a pump motor for BLOODHOUND.

But now for the uncertainties. We are building the world's most powerful hybrid rocket ('hybrid' means solid fuel + liquid oxidiser), so there is nothing we can really compare this with. The chemistry is unique, so we're only estimating the thrust of the rocket motor – we won't know exactly how much pressure the oxidiser will need until we start the test firings in the Spring. To add some more uncertainty, the pump is also unique, so we don't know exactly how much power it will take – again all we have is a calculated figure, until we start doing things for real.

If everything goes well, then the rocket thrust will match or exceed our predictions and the rocket pump will be at least as efficient as we hope. If not, then we have some modifications available to increase the power. Alternatively, we can use slightly less power over a longer period of time, modifying the 'performance curve' to get to 1000 mph. We won't know the answers until we do the tests; this is why it's called an 'Engineering Adventure' – uncertainty makes it exciting! Whatever the result, we'll share it with you as soon as we know.

There are a lot of other big engineering challenges to deliver this year – a 1000 mph tail fin (and there's still room to put your name on the Fin you want to support the world's fastest car), 1000 mph wheels and brakes, computer control systems – the list goes on. The excitement of course comes from seeing a virtual car become real after so long spend researching and designing.

I'm particularly looking forward to the rocket tests though. It too has been in development for years and it will be great to have a final solution. Better still, it's going to be amazing to watch. As impressive as that winter storm? I should think so!

Andy Green

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.


Supporting Information
Do you have any comments about this article?

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

© MA Business Ltd (a Mark Allen Group Company) 2022