Demonstrating the lightweighting potential in hybrid automotive body parts

In a comprehensive joint study, Henkel and RLE International have examined and validated the potential of high-performance structural foam for lightweighting in automotive body and closure parts. The study has revealed that fibre reinforced polymer components with structural foam ribbing and reinforcements can save more than 40 kg of weight per car compared to conventional all-metal designs.

Body components, especially closures, have always been the focus of lightweighting in automotive engineering, since they form some of the biggest parts of vehicles. Even one tenth of a millimetre in thickness can mean several kilos in overall weight, with subsequent effects on fuel or electrical power consumption as well as carbon emissions. In most modern cars, however, the engineering limit on thickness and steel grades are definitely a challenge so further thickness reductions can create problems in meeting the required mechanical strength and crash protection.

“In a radical new approach, we investigated the possibilities of overcoming these constraints by replacing traditional all-metal designs with hybrid fibre and structural foam reinforced polymer solutions,” says David Caro, head of global engineering, OEM design, automotive & transportation at Henkel. “The results of our study have confirmed that we can achieve significant further weight reductions without compromising the safety in typical crash scenarios by optimising the stiffness of fibre reinforced plastic frames or carriers with selective foam ribbing and reinforcements, with competitive costs.”

The hybrid parts feature a solid frame or carrier moulded in higher percentage fibre reinforced polymers (FRP) and selective reinforcements using Henkel’s Teroson EP structural foam, a commercially available epoxy-based material that delivers high strength and stiffness at extremely low weight. The foam is injected into the carrier at predefined sections, expands in the e-coat oven and creates a stiff connection between the hybrid component and adjacent parts in the body-in-white.

Non-cured, it is resistant to normal automotive washing and phosphating solutions as well as to electro-dip coating. Curing then takes place within 15 minutes or less, depending on the specific foam grade.

The comprehensive project included all major body and closure parts of an SUV vehicle, from the bumpers, fenders, pillars and doors to the rocker panel, side panels and tailgate. “The final designs were arrived at in several consecutive optimisation cycles based on extensive finite-element engineering and crash simulations in line with standard specifications,” explains Tobias Wigand, project manager, new business development, RLE International. “In some cases, such as the side doors, our hybrid structural plastic and foam solution was even capable of exceeding the expected performance when compared with the initial all-aluminium design.”

The crash simulations performed in the study strictly adhered to demanding international automotive standards, such as offset and small overlap frontal crash testing according to the European New Car Assessment Programme (Euro NCAP) and the Insurance Institute of Highway Safety (IIHS) at speeds of 64 and 50 km/h, respectively. The side (or “pole”) crash performance was tested according to U.S. NCAP specifications at 32 km/h. The rear impact scenario was simulated with a 60 km/h moving barrier onto a fixed test vehicle as defined by U.S. Federal Motor Vehicle Safety Standard (FMVSS) No. 301. Another IIHS test standard was applied to establish the roof crush behaviour.

Altogether, the hybrid designs with Henkel’s Teroson EP structural foam were found to pass all these tests well within the limits of deformation and intrusion, while offering substantial weight savings compared to conventional all-metal components. Henkel and RLE International are offering their hybrid structural design technology as an encompassing joint approach from concept to launch and series production, ensuring the process security and sustainability of all development, engineering and material processes. Each design is fully engineered and optimised for all pertinent crash load cases according to customer specifications and applicable industry standards.

Hot form quench sets aluminium lightweighting standard

Impression Technologies has released a white paper introducing the benefits of its ground-breaking new technology: hot form quench (HFQ). An innovative hot forming process was developed to offer a step change in aluminium forming across multiple industries, including automotive and aerospace.

The drive to reduce emissions and improve efficiency through lightweighting constantly requires manufacturers to find new solutions. The white paper, titled ‘Hot Form Quench (HFQ) Technology: The new international standard for cost-effective automotive lightweighting using aluminium’, outlines how manufacturers can easily and cost-effectively replace steel or low-gauge aluminium components using HFQ. The process cycle time for HFQ is at least as rapid as alternatives such as boron steel processing, enabling the low-cost, high-volume manufacturing demanded in automotive applications.

The white paper describes the benefits and process of HFQ in detail. It also includes examples and case studies that illustrate how the technology can be applied and what can be achieved: a measurably stronger final component, alongside major savings in weight and cost when compared with alternatives.

“The automotive industry is on a constant mission to improve structural strength, integrity, consistency, durability and safety, all while reducing weight and cost,” explained Jonathan Watkins, CEO of Impression Technologies. “This is a very challenging set of goals that requires constant evolution and quick uptake of new technologies and processes.

“HFQ is a unique, patented process that enables low-cost production of high-strength aluminium parts. The benefits of aluminium in automotive applications are widely known, but there have been concerns around cost, strength and production rate. HFQ addresses these.”


Author
Engineering Materials

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.

 

Do you have any comments about this article?
Name
 
Email
 
Comments
 

Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Please view our Terms and Conditions before leaving a comment.

© MA Business Ltd (a Mark Allen Group Company) 2019